Appendix G Legal Information

This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless this wireless LAN product is operating within the boundaries of the owner's property, its use requires a “general authorization.” Please check http://www.sviluppoeconomico.gov.it/ for more details.

Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all 'interno del proprio fondo, l'utilizzo di prodotti Wireless LAN richiede una “Autorizzazione Generale”. Consultare http://www.sviluppoeconomico.gov.it/ per maggiori dettagli.

Latvia

The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic Communications Office. Please check http:// www.esd.lv for more details.

2.4GHz frekvenèu joslas izmantoðanai ârpus telpâm nepiecieðama atïauja no Elektronisko sakaru direkcijas. Vairâk informâcijas: http://www.esd.lv.

Notes:

1.Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in those countries.

2.The regulatory limits for maximum output power are specified in EIRP. The EIRP level (in dBm) of a device can be calculated by adding the gain of the antenna used(specified in dBi) to the output power available at the connector (specified in dBm).

Safety Warnings

Do NOT use this product near water, for example, in a wet basement or near a swimming pool.

Do NOT expose your device to dampness, dust or corrosive liquids.

Do NOT store things on the device.

Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning.

Connect ONLY suitable accessories to the device.

Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY qualified service personnel should service or disassemble this device. Please contact your vendor for further information.

Make sure to connect the cables to the correct ports.

Place connecting cables carefully so that no one will step on them or stumble over them.

Always disconnect all cables from this device before servicing or disassembling.

Use ONLY an appropriate power adaptor or cord for your device.

Connect the power adaptor or cord to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe).

Do NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor or cord.

Do NOT use the device if the power adaptor or cord is damaged as it might cause electrocution.

If the power adaptor or cord is damaged, remove it from the device and the power source.

Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a new one.

Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning.

Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your device.

Use only No. 26 AWG (American Wire Gauge) or larger telecommunication line cord.

Antenna Warning! This device meets ETSI and FCC certification requirements when using the included antenna(s). Only use the included antenna(s).

Your product is marked with this symbol, which is known as the WEEE mark. WEEE stands for Waste Electronics and Electrical Equipment. It means that used electrical and electronic products should not be mixed with general waste. Used electrical and electronic equipment should be treated separately.

 

293

AMG1312-T Series User’s Guide