Chapter 20 Classifier
Table 46 | Advanced Application > Classifier (continued) |
LABEL | DESCRIPTION |
Add | Click Add to insert the entry in the summary table below and save your |
| changes to the Switch’s |
| is turned off or loses power, so use the Save link on the top navigation panel |
| to save your changes to the |
| configuring. |
|
|
Cancel | Click Cancel to reset the fields back to your previous configuration. |
|
|
Clear | Click Clear to set the above fields back to the factory defaults. |
|
|
20.2.1 Viewing and Editing Classifier Configuration
To view a summary of the classifier configuration, scroll down to the summary table at the bottom of the Classifier screen. To change the settings of a rule, click a number in the Index field.
Note: When two rules conflict with each other, a higher layer rule has priority over lower layer rule.
Figure 92 Advanced Application > Classifier: Summary Table
The following table describes the labels in this screen.
Table 47 Classifier: Summary Table
LABEL | DESCRIPTION |
Index | This field displays the index number of the rule. Click an index number to edit |
| the rule. |
|
|
Active | This field displays Yes when the rule is activated and No when it is |
| deactivated. |
|
|
Name | This field displays the descriptive name for this rule. This is for identification |
| purpose only. |
|
|
Rule | This field displays a summary of the classifier rule’s settings. |
|
|
Delete | Click Delete to remove the selected entry from the summary table. |
|
|
Cancel | Click Cancel to clear the Delete check boxes. |
|
|
The following table shows some other common Ethernet types and the corresponding protocol number.
Table 48 Common Ethernet Types and Protocol Numbers
ETHERNET TYPE | PROTOCOL NUMBER |
IP ETHII | 0800 |
|
|
X.75 Internet | 0801 |
|
|
178 |
| |
| ||
|
|
|