Chapter 8 Basic Setting

 

Table 15

Basic Setting > PoE Setup (continued)

 

LABEL

 

DESCRIPTION

 

PD Priority

 

This field is only available on the PWR model but not available for the

 

 

 

Gigabit or mini-GBIC ports.

 

 

 

When the total power requested by the PDs exceeds the total PoE power

 

 

 

budget on the Switch, you can set the PD priority to allow the Switch to

 

 

 

provide power to ports with higher priority.

 

 

 

Select Critical to give the highest PD priority on the port.

 

 

 

Select High to set the Switch to assign the remaining power to the port

 

 

 

after all critical priority ports are served.

 

 

 

Select Low to set the Switch to assign the remaining power to the port

 

 

 

after all critical and high priority ports are served.

 

 

 

 

 

Apply

 

Click Apply to save your changes to the Switch’s run-time memory. The

 

 

 

Switch loses these changes if it is turned off or loses power, so use the

 

 

 

Save link on the top navigation panel to save your changes to the non-

 

 

 

volatile memory when you are done configuring.

 

 

 

 

 

Cancel

 

Click Cancel to begin configuring this screen afresh.

 

 

 

 

 

89

GS2200-24 User’s Guide