Chapter 4 The Web Configurator

 

Table 5 Navigation Panel Links (continued)

 

LINK

DESCRIPTION

 

 

Advanced Application

 

 

 

 

 

 

VLAN

This link takes you to screens where you can configure port-based or

 

 

 

802.1Q VLAN (depending on what you configured in the Switch Setup

 

 

 

menu). You can also configure a protocol based VLAN or a subnet based

 

 

 

VLAN in these screens.

 

 

 

 

 

 

Static MAC

This link takes you to a screen where you can configure static MAC

 

 

Forwarding

addresses for a port. These static MAC addresses do not age out.

 

 

 

 

 

 

Static

This link takes you to a screen where you can configure static multicast

 

 

Multicast

MAC addresses for port(s). These static multicast MAC addresses do not

 

 

Forwarding

age out.

 

 

 

 

 

 

Filtering

This link takes you to a screen to set up filtering rules.

 

 

 

 

 

 

Spanning Tree

This link takes you to screens where you can configure the RSTP/MRSTP/

 

 

Protocol

MSTP to prevent network loops.

 

 

 

 

 

 

Bandwidth

This link takes you to a screen where you can configure bandwidth limits

 

 

Control

on the Switch.

 

 

 

 

 

 

Broadcast

This link takes you to a screen to set up broadcast filters.

 

 

Storm Control

 

 

 

 

 

 

 

Mirroring

This link takes you to screens where you can copy traffic from one port

 

 

 

or ports to another port in order that you can examine the traffic from

 

 

 

the first port without interference.

 

 

 

 

 

 

Link

This link takes you to screens where you can logically aggregate physical

 

 

Aggregation

links to form one logical, higher-bandwidth link.

 

 

 

 

 

 

Port

This link takes you to a screen where you can configure IEEE 802.1x port

 

 

Authentication

authentication for clients communicating via the Switch.

 

 

 

 

 

 

Port Security

This link takes you to screens where you can activate MAC address

 

 

 

learning and set the maximum number of MAC addresses to learn on a

 

 

 

port.

 

 

 

 

 

 

Classifier

This link takes you to a screen where you can configure the Switch to

 

 

 

group packets based on the specified criteria.

 

 

 

 

 

 

Policy Rule

This link takes you to a screen where you can configure the Switch to

 

 

 

perform special treatment on the grouped packets.

 

 

 

 

 

 

Queuing

This link takes you to a screen where you can configure queuing with

 

 

Method

associated queue weights for each port.

 

 

 

 

 

 

Multicast

This link takes you to screens where you can configure various multicast

 

 

 

features, IGMP snooping and create multicast VLANs.

 

 

 

 

 

 

AAA

This link takes you to a screen where you can configure authentication,

 

 

 

authorization services via external servers. The external servers can be

 

 

 

either RADIUS (Remote Authentication Dial-In User Service) or

 

 

 

TACACS+ (Terminal Access Controller Access-Control System Plus).

 

 

 

 

 

 

IP Source

This link takes you to screens where you can configure filtering of

 

 

Guard

unauthorized DHCP and ARP packets in your network.

 

 

 

 

 

 

Loop Guard

This link takes you to a screen where you can configure protection

 

 

 

against network loops that occur on the edge of your network.

 

 

 

 

 

 

Layer 2

This link takes you to a screen where you can configure L2PT (Layer 2

 

 

Protocol

Protocol Tunneling) settings on the Switch.

 

 

Tunneling

 

 

 

 

 

 

 

47

GS2200-24 User’s Guide