Chapter 31 Maintenance
The following table describes the labels in this screen.
Table 87 Management > Maintenance
LABEL | DESCRIPTION |
Current | This field displays which configuration (Configuration 1 or Configuration |
| 2) is currently operating on the Switch. |
|
|
Firmware | Click Click Here to go to the Firmware Upgrade screen. |
Upgrade |
|
|
|
Restore | Click Click Here to go to the Restore Configuration screen. |
Configuratio |
|
n |
|
|
|
Backup | Click Click Here to go to the Backup Configuration screen. |
Configuratio |
|
n |
|
|
|
Load | Click Click Here to reset the configuration to the factory default settings. |
Factory |
|
Default |
|
|
|
Save | Click Config 1 to save the current configuration settings to Configuration |
Configuratio | 1 on the Switch. |
n | Click Config 2 to save the current configuration settings to Configuration |
| |
| 2 on the Switch. |
|
|
Reboot | Click Config 1 to reboot the system and load Configuration 1 on the |
System | Switch. |
| Click Config 2 to reboot the system and load Configuration 2 on the |
| Switch. |
| Note: Make sure to click the Save button in any screen to save your |
| settings to the current configuration on the Switch. |
|
|
31.2.1 Load Factory Default
Follow the steps below to reset the Switch back to the factory defaults.
1In the Maintenance screen, click the Click Here button next to Load Factory Default to clear all Switch configuration information you configured and return to the factory defaults.
2Click OK to reset all Switch configurations to the factory defaults.
Figure 151 Load Factory Default: Start
276 |
| |
| ||
|
|
|