ZyXEL Communications GS2200-24 30.2 DHCP Status

Chapter 30 DHCP

The following describes the DHCP relay information that the Switch sends to the DHCP server:

Table 83 Relay Agent Information

FIELD LABELS	DESCRIPTION
Slot ID	(1 byte) This value is always 0 for stand-alone switches.

Port ID	(1 byte) This is the port that the DHCP client is connected to.

VLAN ID	(2 bytes) This is the VLAN that the port belongs to.

Information	(up to 64 bytes) This optional, read-only field is set according to
	system name set in Basic Settings > General Setup.

Click IP Application > DHCP in the navigation panel. The DHCP Status screen displays.

Figure 143 IP Application > DHCP Status

The following table describes the labels in this screen.

Table 84 IP Application > DHCP

LABEL	DESCRIPTION
Relay Mode	This field displays:
	• None: if the Switch is not configured as a DHCP relay agent.
	• Global: if the Switch is configured as a DHCP relay agent only.
	• VLAN: followed by a VLAN ID if it is configured as a relay agent for
	specific VLAN(s).