Chapter 8 Basic Setting
Click the PoE Setup link in the Basic Setting > PoE Status screen. The following screen opens.
Figure 46 Basic Setting > PoE Setup
The following table describes the labels in this screen.
Table 15 Basic Setting > PoE Setup
LABEL | DESCRIPTION |
PoE Mode | Select the power management mode you want the Switch to use. |
| • Classification - Select this if you want the Switch to reserve the Max |
| Power (mW) to each PD according to the priority level. If the total |
| power supply runs out, PDs with lower priority do not get power to |
| function. |
| • Consumption - Select this if you want the Switch to manage the total |
| power supply so that each connected PD gets a resource. However, the |
| power allocated by the Switch may be less than the Max Power (mW) of |
| the PD. PDs with higher priority also get more power than those with |
| lower priority levels. |
|
|
Port | This is the port index number. |
|
|
PD | Select this to provide power to a PD connected to the port. |
| If left unchecked, the PD connected to the port cannot receive power from |
| the Switch. |
|
|
88 |
| |
| ||
|
|
|