ZyXEL Communications GS2200-24 5.1.2 Setting Port VID

Chapter 5 Initial Setup Example

5.1.2 Setting Port VID

Use PVID to add a tag to incoming untagged frames received on that port so that the frames are forwarded to the VLAN group that the tag defines.

In the example network, configure 2 as the port VID on port 1 so that any untagged frames received on that port get sent to VLAN 2.

Figure 20 Initial Setup Network Example: Port VID

1Click Advanced Applications > VLAN in the navigation panel. Then click the VLAN Port Setting link.

2 Enter 2 in the PVID field for port 1 and click Apply to save your changes back to the run-time memory.

Settings in the run-time memory are lost when the Switch’s power is turned off.

	55
GS2200-24 User’s Guide