Chapter 40 Product Specifications
Table 112 Hardware Specifications
LEDs | Per switch: PWR, SYS, ALM |
| |
| |
| ACT, PoE |
| Per |
| Per |
| ACT, FDX |
|
|
Operating | Temperature: 0º C ~ 50º C (32º F ~ 122º F) |
Environment | Humidity: 10 ~ 95% |
| |
|
|
Storage Environment | Temperature: |
| Humidity: 10 ~ 95% |
|
|
Fuse Specification | 250 VAC, T2A |
|
|
Console port | |
|
|
Capacity | 56 Gbps |
|
|
Forwarding Rate | 41.7 million packets per second |
|
|
Table 113 Firmware Specifications
FEATURE | DESCRIPTION | |
Default IP Address | 192.168.1.1 | |
|
| |
Default Subnet Mask | 255.255.255.0 (24 bits) | |
|
| |
Administrator User | admin | |
Name |
| |
|
| |
Default Password | 1234 | |
|
| |
Number of Login | 4 management accounts configured on the Switch. | |
Accounts Configurable | Authentication via RADIUS and TACACS+ also available. | |
on the Switch | ||
| ||
|
| |
Maximum Frame Size | 9 K (9216 bytes) | |
|
| |
VLAN | A VLAN (Virtual Local Area Network) allows a physical network | |
| to be partitioned into multiple logical networks. Devices on a | |
| logical network belong to one group. A device can belong to | |
| more than one group. With VLAN, a device cannot directly talk | |
| to or hear from devices that are not in the same group(s); the | |
| traffic must first go through a router. | |
|
| |
MAC Address Filter | Filter traffic based on the source and/or destination MAC | |
| address and VLAN group (ID). | |
|
| |
DHCP (Dynamic Host | Use this feature to have the Switch forward DHCP requests to | |
Configuration Protocol) | DHCP servers on your network. | |
Relay |
| |
|
| |
IGMP Snooping | The Switch supports IGMP snooping, enabling group multicast | |
| traffic to be only forwarded to ports that are members of that | |
| group; thus allowing you to significantly reduce multicast traffic | |
| passing through your Switch. | |
|
|
334 |
| |
| ||
|
|
|