Chapter 25 IP Source Guard
new static binding replaces the original one. To open this screen, click Advanced Application > IP Source Guard > Static Binding.
Figure 116 IP Source Guard Static Binding
The following table describes the labels in this screen.
Table 66 IP Source Guard Static Binding
LABEL | DESCRIPTION |
MAC Address | Enter the source MAC address in the binding. |
|
|
IP Address | Enter the IP address assigned to the MAC address in the binding. |
|
|
VLAN | Enter the source VLAN ID in the binding. |
|
|
Port | Specify the port(s) in the binding. If this binding has one port, |
| select the first radio button and enter the port number in the field |
| to the right. If this binding applies to all ports, select Any. |
|
|
Add | Click this to create the specified static binding or to update an |
| existing one. |
|
|
Cancel | Click this to reset the values above based on the last selected |
| static binding or, if not applicable, to clear the fields above. |
|
|
Clear | Click this to clear the fields above. |
|
|
Index | This field displays a sequential number for each binding. |
|
|
MAC Address | This field displays the source MAC address in the binding. |
|
|
IP Address | This field displays the IP address assigned to the MAC address in |
| the binding. |
|
|
Lease | This field displays how long the binding is valid. |
|
|
Type | This field displays how the Switch learned the binding. |
| static: This binding was learned from information provided |
| manually by an administrator. |
|
|
VLAN | This field displays the source VLAN ID in the binding. |
|
|
224 |
| |
| ||
|
|
|