Chapter 23 Multicast
23.3 Multicast Setting
Click Advanced Applications > Multicast > Multicast Setting link to display the screen as shown. See Section 23.1 on page 191 for more information on multicasting.
Figure 101 Advanced Application > Multicast > Multicast Setting
The following table describes the labels in this screen.
Table 54 Advanced Application > Multicast > Multicast Setting
LABEL | DESCRIPTION |
IGMP Snooping | Use these settings to configure IGMP Snooping. |
|
|
Active | Select Active to enable IGMP Snooping to forward group multicast |
| traffic only to ports that are members of that group. |
|
|
Querier | Select this option to allow the Switch to send IGMP General Query |
| messages to the VLANs with the multicast hosts attached. |
|
|
Host Timeout | Specify the time (from 1 to 16,711,450) in seconds that elapses before |
| the Switch removes an IGMP group membership entry if it does not |
| receive report messages from the port. |
|
|
| 195 |
|
|