Chapter 4 The Web Configurator
Table 5 Navigation Panel Links (continued)
LINK | DESCRIPTION |
IP Application |
|
|
|
Static Routing | This link takes you to a screen where you can configure static routes. A |
| static route defines how the Switch should forward traffic by configuring |
| the TCP/IP parameters manually. |
|
|
DiffServ | This link takes you to screens where you can enable DiffServ, configure |
| marking rules and set |
|
|
DHCP | This link takes you to screens where you can configure the DHCP |
| settings. |
|
|
Management |
|
|
|
Maintenance | This link takes you to screens where you can perform firmware and |
| configuration file maintenance as well as reboot the system. |
|
|
Access Control | This link takes you to screens where you can change the system login |
| password and configure SNMP and remote management. |
|
|
Diagnostic | This link takes you to a screen where you can view system logs and test |
| port(s). |
|
|
Syslog | This link takes you to screens where you can setup system logs and a |
| system log server. |
|
|
Cluster | This link takes you to screens where you can configure clustering |
Management | management and view its status. |
|
|
MAC Table | This link takes you to a screen where you can view the MAC addresses |
| (and types) of devices attached to what ports and VLAN IDs. |
|
|
ARP Table | This link takes you to a screen where you can view the MAC addresses – |
| IP address resolution table. |
|
|
Configure | This link takes you to a screen where you can copy attributes of one port |
Clone | to other ports. |
|
|
48 |
| |
| ||
|
|
|