Chapter 8 Basic Setting
8.5 Switch Setup Screen
Click Basic Setting > Switch Setup in the navigation panel to display the screen as shown. The VLAN setup screens change depending on whether you choose 802.1Q or Port Based in the VLAN Type field in this screen. Refer to Chapter 9 on page 93 for more information on VLAN.
Figure 41 Basic Setting > Switch Setup
The following table describes the labels in this screen.
Table 11 Basic Setting > Switch Setup
LABEL | DESCRIPTION |
VLAN Type | Choose 802.1Q or Port Based. The VLAN Setup screen changes |
| depending on whether you choose 802.1Q VLAN type or Port Based |
| VLAN type in this screen. See Chapter 9 on page 93 for more |
| information. |
|
|
GARP Timer: Switches join VLANs by making a declaration. A declaration is made by issuing a Join message using GARP. Declarations are withdrawn by issuing a Leave message. A Leave All message terminates all registrations. GARP timers set declaration timeout values. See the chapter on VLAN setup for more background information.
Join Timer | Join Timer sets the duration of the Join Period timer for GVRP in |
| milliseconds. Each port has a Join Period timer. The allowed Join Time |
| range is between 100 and 65535 milliseconds; the default is 200 |
| milliseconds. See the chapter on VLAN setup for more background |
| information. |
|
|
Leave Timer | Leave Time sets the duration of the Leave Period timer for GVRP in |
| milliseconds. Each port has a single Leave Period timer. Leave Time |
| must be two times larger than Join Timer; the default is 600 |
| milliseconds. |
|
|
| 79 |
|
|