Chapter 8 Basic Setting
The following table describes the labels in this screen.
Table 9 Basic Setting > System Info
LABEL | DESCRIPTION |
System | This field displays the descriptive name of the Switch for identification |
Name | purposes. |
|
|
Product | This field displays the product model of the Switch. Use this information |
Model | when searching for firmware upgrade or looking for other support |
| information in the website. |
|
|
ZyNOS F/W | This field displays the version number of the Switch 's current firmware |
Version | including the date created. |
|
|
Ethernet | This field refers to the Ethernet MAC (Media Access Control) address of the |
Address | Switch. |
|
|
Hardware Monitor | |
|
|
Temperature | The Switch has temperature sensors that are capable of detecting and |
Unit | reporting if the temperature rises above the threshold. You may choose |
| the temperature unit (Centigrade or Fahrenheit) in this field. |
|
|
Temperature | BOARD, MAC and PHY refer to the location of the temperature sensors on |
| the Switch printed circuit board. |
|
|
Current | This shows the current temperature at this sensor. |
|
|
MAX | This field displays the maximum temperature measured at this sensor. |
|
|
MIN | This field displays the minimum temperature measured at this sensor. |
|
|
Threshold | This field displays the upper temperature limit at this sensor. |
|
|
Status | This field displays Normal for temperatures below the threshold and Error |
| for those above. |
|
|
Fan Speed | A properly functioning fan is an essential component (along with a |
(RPM) | sufficiently ventilated, cool operating environment) in order for the device |
| to stay within the temperature threshold. Each fan has a sensor that is |
| capable of detecting and reporting if the fan speed falls below the |
| threshold shown. |
|
|
Current | This field displays this fan's current speed in Revolutions Per Minute (RPM). |
|
|
MAX | This field displays this fan's maximum speed measured in Revolutions Per |
| Minute (RPM). |
|
|
MIN | This field displays this fan's minimum speed measured in Revolutions Per |
| Minute (RPM). "<41" is displayed for speeds too small to measure (under |
| 2000 RPM). |
|
|
Threshold | This field displays the minimum speed at which a normal fan should work. |
|
|
Status | Normal indicates that this fan is functioning above the minimum speed. |
| Error indicates that this fan is functioning below the minimum speed. |
|
|
Voltage(V) | The power supply for each voltage has a sensor that is capable of |
| detecting and reporting if the voltage falls out of the tolerance range. |
|
|
Current | This is the current voltage reading. |
|
|
MAX | This field displays the maximum voltage measured at this point. |
|
|
MIN | This field displays the minimum voltage measured at this point. |
|
|
| 75 |
|
|