Chapter 39 Troubleshooting
1Make sure you understand the normal behavior of the LED. See Section 3.3 on page 38.
2Check the hardware connections. See Section 39.1 on page 329.
3Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4Disconnect and
5If the problem continues, contact the vendor.
39.2Switch Access and Login
I forgot the IP address for the Switch.
1The default IP address is 192.168.1.1.
2Use the console port to log in to the Switch.
3If this does not work, you have to reset the device to its factory defaults. See Section 4.6 on page 50.
I forgot the username and/or password.
1The default username is admin and the default password is 1234.
2If this does not work, you have to reset the device to its factory defaults. See Section 4.6 on page 50.
I cannot see or access the Login screen in the web configurator.
1Make sure you are using the correct IP address.
•The default IP address is 192.168.1.1.
•If you changed the IP address, use the new IP address.
330 |
| |
| ||
|
|
|