Chapter 25 IP Source Guard
Table 71 ARP Inspection Status (continued)
LABEL | DESCRIPTION |
Cancel | Click this to clear the Delete check boxes above. |
|
|
Change Pages | Click Previous or Next to show the previous/next screen if all status |
| information cannot be seen in one screen. |
|
|
25.7 ARP Inspection VLAN Status
Use this screen to look at various statistics about ARP packets in each VLAN. To open this screen, click Advanced Application > IP Source Guard > ARP Inspection > VLAN Status.
Figure 122 ARP Inspection VLAN Status
The following table describes the labels in this screen.
Table 72 ARP Inspection VLAN Status
LABEL | DESCRIPTION |
Show VLAN range | Use this section to specify the VLANs you want to look at in the |
| section below. |
|
|
Enabled VLAN | Select this to look at all the VLANs on which ARP inspection is enabled |
| in the section below. |
|
|
Selected VLAN | Select this to look at all the VLANs in a specific range in the section |
| below. Then, enter the lowest VLAN ID (Start VID) and the highest |
| VLAN ID (End VID) you want to look at. |
|
|
Apply | Click this to display the specified range of VLANs in the section below. |
|
|
VID | This field displays the VLAN ID of each VLAN in the range specified |
| above. |
|
|
Received | This field displays the total number of ARP packets received from the |
| VLAN since the Switch last restarted. |
|
|
Request | This field displays the total number of ARP Request packets received |
| from the VLAN since the Switch last restarted. |
|
|
234 |
| |
| ||
|
|
|