Chapter 6 Tutorial
1To set your NWA in secondary controller AP mode, open the Controller > Redundacy screen (this screen only appears when the NWA is in Controller AP mode) in the Web Configurator of the NWA that you want to serve as backup.
Figure 64 Tutorial: Secondary Controller AP
2Enable Redundancy. Then select Secondary AP Controller and click Apply.
6.5.4.2 Primary AP ControllerThe primary controller AP manages the NWA APs (in managed AP mode) in your network. Changes made in the Web Configurator of the NWA primary AP controller are synchronized automatically with the secondary controller AP (if there is one) and the members of the managed AP list.
1To set your NWA in primary controller AP mode, open the Controller > Redundacy screen (this screen only appears when the NWA is in Controller AP mode) in the Web Configurator of the NWA that you want to serve as the main controller.
Figure 65 Tutorial: Primary Controller AP
2Enable Redundancy. Then select Primary AP Controller and enter the IP address of the secondary controller AP (required). Click Apply.
Note: Only NWAs in managed AP mode are visible to the controller AP.
102 |
| |
| ||
|
|
|