Chapter 3 Status Screens
Table 4 The Status Screen
LABEL | DESCRIPTION |
Registration Type | This field is available only when the NWA is in AP controller |
| management mode. |
| This displays Manual when an access point in managed AP mode |
| needs to register to the NWA manually or Always Accept when |
| the NWA automatically adds any detected access point in |
| managed AP mode to the managed AP list. |
|
|
Management Mode | This field is available only when the NWA is in AP controller |
| management mode. |
| This displays Controller when the NWA is in AP controller |
| management mode. |
|
|
System Resources |
|
|
|
Flash | This field displays the amount of the NWA’s flash memory |
| currently in use. The flash memory is used to store firmware and |
| SSID profiles. |
|
|
Memory | This field displays what percentage of the NWA’s volatile memory |
| is currently in use. The higher the memory usage, the more likely |
| the NWA is to slow down. Some memory is required just to start |
| the NWA and to run the web configurator. |
|
|
CPU | This field displays what percentage of the NWA’s processing ability |
| is currently being used. The higher the CPU usage, the more likely |
| the NWA is to slow down. |
|
|
WLAN1 | This field is not available when the NWA is in AP controller |
Associations | management mode. |
| This field displays the number of wireless clients currently |
| associated with the first wireless module. Each wireless module |
| supports up to 128 concurrent associations. |
|
|
WLAN2 | This field is not available when the NWA is in AP controller |
Associations | management mode. |
| This field displays the number of wireless clients currently |
| associated with the second wireless module. Each wireless module |
| supports up to 128 concurrent associations. |
|
|
Interface Status | This section is not available when the NWA is in AP controller |
| management mode. |
|
|
Interface | This column displays each interface of the NWA. |
|
|
Status | This field indicates whether or not the NWA is using the interface. |
| For each interface, this field displays Up when the NWA is using |
| the interface and Down when the NWA is not using the interface. |
|
|
Rate | For the LAN port this displays the port speed and duplex setting. |
| For the WLAN1 and WLAN2 interfaces, it displays the downstream |
| and upstream transmission rate or N/A if the interface is not in |
| use. |
|
|
SSID Status | This section is not available when the NWA is in AP controller |
| management mode. |
|
|
Interface | This column displays each of the NWA’s wireless interfaces, |
| WLAN1 and WLAN2. |
|
|
42 |
| |
| ||
|
|
|