Chapter 23 Maintenance
23.3What You Need To Know About the Maintenance Screens
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a "*.bin" extension, for example "[Model #].bin". The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will reboot. See the Firmware and Configuration File Maintenance chapter for upgrading firmware using FTP/TFTP commands.
23.4 System Status Screen
Use this screen to get a quick summary of the status of your NWA. Click
Maintenance > System Status. The following screen displays.
Figure 172 Maintenance > System Status
The following table describes the labels in this screen.
Table 84 Maintenance > System Status
LABEL | DESCRIPTION |
System Name | This is the System Name you can configure in the SYSTEM > |
| General screen. It is for identification purposes |
|
|
ZyNOS Firmware | This is the ZyNOS Firmware version and date created. ZyNOS is |
Version | ZyXEL's proprietary Network Operating System design. |
|
|
IP Address | This is the Ethernet port IP address. |
|
|
IP Subnet Mask | This is the Ethernet port subnet mask. |
|
|
DHCP | This is the Ethernet port DHCP role - Client or None. |
|
|
Show Statistics | Click Show Statistics to see the NWA performance statistics such |
| as number of packets sent and number of packets received for each |
| port. |
|
|
23.4.1 System Statistics Screen
Use this screen to view diagnostic information about the NWA. Click Maintenance
>Show Statistics. The following screen pops up.
266 |
| |
| ||
|
|
|