Chapter 2 Introducing the Web Configurator

2.2 Resetting the NWA

This replaces the current configuration file with the factory-default configuration file. This means that you will lose all the settings you previously configured. The password will be reset to 1234.

2.2.1 Methods of Restoring Factory-Defaults

You can erase the current configuration and restore factory defaults in the following ways:

•Use the RESET button to upload the default configuration file. Hold this button in for about 10 seconds (the lights will begin to blink). Use this method for cases when the password or IP address of the NWA is not known. This applies to the NWA-3500 only.

•Use the web configurator to restore defaults (refer to Section 23.8.3 on page 274).

•Transfer the configuration file to your NWA using FTP. See the section on SMT configuration for more information.

2.3Navigating the Web Configurator

The following summarizes how to navigate the web configurator from the Status screen.

Note: The Status screen shown in this section applies to the Standalone AP management mode only.

• Click LOGOUT at any time to exit the web configurator.

 

37

NWA-3500/NWA-3550 User’s Guide