Chapter 10 Wireless Security Screen
10.4.2 Security: 802.1x Only
Use this screen to set the selected profile to 802.1x Only security mode. Select
Figure 95 Wireless > Security: 802.1x Only
The following table describes the labels in this screen.
Table 42 Wireless > Security: 802.1x Only
LABEL | DESCRIPTION |
Profile Name | Type a name to identify this security profile. |
|
|
Security Mode | Choose 802.1x Only in this field. |
|
|
ReAuthentication | Specify how often wireless stations have to resend user names and |
Timer | passwords in order to stay connected. |
| Enter a time interval between 10 and 9999 seconds. The default time |
| interval is 1800 seconds (30 minutes). Alternatively, enter “0” to turn |
| reauthentication off. |
| Note: If wireless station authentication is done using a RADIUS |
| server, the reauthentication timer on the RADIUS server |
| has priority. |
|
|
Idle Timeout | The NWA automatically disconnects a wireless station from the wired |
| network after a period of inactivity. The wireless station needs to enter |
| the user name and password again before access to the wired network |
| is allowed. |
| The default time interval is 3600 seconds (or 1 hour). |
|
|
Apply | Click Apply to save your changes. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
| 153 |
|
|