Chapter 20 VLAN
20.4.1 RADIUS VLAN Screen
Use this screen to configure your RADIUS Virtual LAN setup. Click VLAN > RADIUS VLAN. The following screen appears.
Figure 144 VLAN > RADIUS VLAN
The following table describes the labels in this screen.
Table 80 VLAN > RADIUS VLAN
LABEL | DESCRIPTION |
|
|
Block station if | Select this to have the NWA forbid access to wireless clients when |
RADIUS server | the VLAN attributes sent from the RADIUS server do not match a |
assign VLAN name | configured Name field. |
error! | When you select this check box, only users with names configured in |
| |
| this screen can access the network through the NWA. |
|
|
VLAN Mapping Table | Use this table to map names to VLAN IDs so that the RADIUS server |
| can assign each user or user group a mapped VLAN ID. See your |
| RADIUS server documentation for more information on configuring |
| VLAN ID attributes. |
| See Section 20.5.3 on page 243 for more information. |
|
|
| Select a check box to enable the VLAN mapping profile. |
|
|
ID | Type a VLAN ID. Incoming traffic from the WLAN is authorized and |
| assigned a VLAN ID before it is sent to the LAN. |
|
|
| 239 |
|
|