Chapter 16 Remote Management Screens
1.Telnet
2.HTTP
System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds). The NWA automatically logs you out if the management session remains idle for longer than this timeout period. The management session does not time out when a statistics screen is polling. You can change the timeout period in the SYSTEM screen.
16.4 The Telnet Screen
Use this screen to configure your NWA for remote Telnet access. You can use Telnet to access the NWA’s Command Line Interface (CLS).
Click REMOTE MGNT > TELNET. The following screen displays.
Figure 120 Remote MGNT > Telnet
The following table describes the labels in this screen.
Table 57 Remote MGNT > Telnet
LABEL | DESCRIPTION |
TELNET |
|
|
|
Server Port | You can change the server port number for a service if needed, however |
| you must use the same port number in order to use that service for |
| remote management. |
|
|
Server | Select the interface(s) through which a computer may access the NWA |
Access | using Telnet. |
|
|
190 |
| |
| ||
|
|
|