ZyXEL Communications NWA-3550, NWA-3500 manual 95

Chapter 6 Tutorial

3Click the Layer-2 Isolation tab. When the Layer-2 Isolation screen appears, select L2Isolation03’s entry and click Edit. The following screen displays.

Figure 58 Tutorial: Layer-2 Isolation Edit

Enter the network switch’s MAC Address and add a Description (“NET_SWITCH” in this case) in Set 1’s entry.

Enter server 1’s MAC Address and add a Description (“SERVER_1” in this case) in Set 2’s entry.

Change the Profile Name to “L-2-ISO_SERVER_1” and click Apply. You have restricted users on the SERVER_1 network to access only the devices with the MAC addresses you entered.

4Click the MAC Filter tab. When the MAC Filter screen appears, select macfilter03’s entry and click Edit.

Enter the MAC address of the device Alice uses to connect to the network in Index 1’s MAC Address field and enter her name in the Description field, as shown in the following figure. Change the Profile Name to “MacFilter_SERVER_1”. Select Allow Association from the Filter Action field and click Apply.

Figure 59 Tutorial: MAC Filter Edit (SERVER_1)

You have restricted access to the SERVER_1 device whose MAC address you entered. The configured.

network to only the networking SERVER_1 network is now

	95
NWA-3500/NWA-3550 User’s Guide