Chapter 7 System Screens
7.6 Configuring Time Setting
To change your NWA’s time and date, click SYSTEM > Time Setting. The screen appears as shown. Use this screen to configure the NWA’s time based on your local time zone.
Figure 75 System > Time Setting
The following table describes the labels in this screen.
Table 25 System > Time Setting
LABEL | DESCRIPTION |
Current Time | This field displays the time of your NWA. |
| Each time you reload this page, the NWA synchronizes the time |
| with the time server (if configured). |
|
|
Current Date | This field displays the last updated date from the time server. |
|
|
Manual | Select this radio button to enter the time and date manually. If you |
| configure a new time and date, time zone and daylight saving at |
| the same time, the time zone and daylight saving will affect the |
| new time and date you entered. |
|
|
New Time | This field displays the last updated time from the time server or |
(hh:mm:ss) | the last time configured manually. |
| When you set Time and Date Setup to Manual, enter the new |
| time in this field and then click Apply. |
|
|
116 |
| |
| ||
|
|
|