|
| Chapter 3 Status Screens |
| Table 5 Status > AP List | |
| LABEL | DESCRIPTION |
| Channel ID | This is the channel ID number used by each wireless module on |
|
| the AP. |
|
|
|
| SSID List | This is the SSID(s) currently used by each wireless module. |
|
|
|
| VLAN | This is the VLAN ID of each SSID in use. It shows - if the SSID |
|
| does not use VLAN. |
|
|
|
| Stations | This is the number of the wireless clients currently associated to |
|
| each wireless module. |
|
|
|
| Refresh | Click this button to update the screen statistics immediately. |
|
|
|
3.1.2 AP Statistics
Click the AP Statistics link the Status screen when the NWA is in AP controller management mode.
Figure 15 Status > AP Statistics
The following table describes the labels in this screen.
Table 6 Status > AP Statistics
LABEL | DESCRIPTION |
AP Description | This is the descriptive name configured for this AP in the |
| Controller > AP Lists. |
|
|
802.11 Mode | This is the wireless standard supported by each wireless module |
| on the AP. |
|
|
Channel ID | This is the channel ID number used by each wireless module on |
| the AP. |
|
|
Rx PKT | This is the number of received packets on this AP. |
|
|
Tx PKT | This is the number of transmitted packets on this port. |
|
|
Rx FCS Error Count | This is the number of received packets with the Frame Check |
| Sequence (FCS) error(s). |
|
|
Tx Retry Count | This is the number of times for the NWA to resend the packets |
|
|
Automatic Refresh | Select a number of seconds or None from the |
Interval | to update all screen statistics automatically at the end of every |
| time interval or to not update the screen statistics. |
|
|
Refresh | Click this button to update the screen statistics immediately. |
|
|
Reset |
|
|
|
| 45 |
|
|