Chapter 5 Controller AP Mode
5.4 AP List Screen
Use this screen to view and add managed APs. By default, the NWA is always included in this table. Although you cannot remove it, you can edit its settings.
Click Controller > AP Lists. The following screen displays.
Figure 24 The Controller > AP Lists Screen
The following table describes the labels in this screen.
Table 10 The Controller > AP Lists Screen
LABEL | DESCRIPTION |
Managed Access | This section lists the access points currently controlled by the |
Points List | NWA. This always includes the NWA itself. |
|
|
Index | This is the index number of the managed AP. |
|
|
Select | Click this then select Edit to configure the managed AP’s settings. |
| Click Delete to remove it from the NWA’s managed AP list. |
|
|
IP | This displays the IP address of the managed AP. |
|
|
MAC Address | This displays the MAC address of the managed AP. |
|
|
Model | This displays the model name and 802.11 mode of the managed |
| AP. |
|
|
Description | This displays the description of the managed AP. |
|
|
| 57 |
|
|