ZyXEL Communications NWA-3550, NWA-3500 15.3.1 Configuration Screen

Chapter 15 Rogue AP Detection

Use this screen to enable your NWA’s Rogue AP detection settings. Click Rogue AP > Configuration. The following screen appears:

Figure 115 Rogue AP > Configuration

The following table describes the labels in this screen.

Table 54 Rogue AP > Configuration

LABEL	DESCRIPTION
Rogue AP Period	Select Enable to turn rogue AP detection on. You must also enter
Detection	a time value in the Period field.
	Select No to turn rogue AP detection off.

Period (minutes)	Enter the period you want the NWA to wait between scanning for
	rogue APs (between 10 and 60 minutes). You must also select
	Enable in the Active Rogue AP Period Detection field.

Expiration Time	Specify how long (between 30 and 180 minutes) an AP’s entry can
(minutes)	remain in the Rogue AP List before the NWA removes it from the
	list if the AP is no longer active.

Friendly AP List

Export	Click this button to save the current list of friendly APs’ MAC
	addresses and descriptions (as displayed in the ROGUE AP >
	Friendly AP screen) to your computer.

File Path	Enter the location of a previously-saved friendly AP list to upload
	to the NWA. Alternatively, click the Browse button to locate a list.

Browse	Click this button to locate a previously-saved list of friendly APs to
	upload to the NWA.

Import	Click this button to upload the previously-saved list of friendly APs
	displayed in the File Path field to the NWA.

Apply	Click Apply to save your settings.

Reset	Click Reset to return all fields in this screen to their previously-
	saved values.