ZyXEL Communications NWA-3550, NWA-3500 58

Chapter 5 Controller AP Mode

Table 10 The Controller > AP Lists Screen

LABEL	DESCRIPTION
Status	This displays whether the managed AP is active, not active or
	upgrading its firmware.
	• Red: the AP is not active.
	• Green: the AP is active.
	• Yellow: the AP is upgrading its firmware.

	Note: You can still edit a managed AP’s settings even if it is
	offline. However, the changes only take effect when the
	NWA detects that the managed AP is online again.

Edit	Select the managed AP from the list and click this to edit the
	managed AP’s settings.

Delete	Select the managed AP from the list and click this to delete the
	managed AP from the list.
	When you do this, the managed AP is no longer handled by the
	NWA until you add it back to the list.

Un-Managed Access	This section lists the CAPWAP-enabled access points in the area
Points List	that are in managed AP mode but which are not currently
	controlled by the NWA.

Index	This is the index number of an unmanaged AP that is requesting
	to be managed by the NWA.

Select	Click this then select Add to include the unmanaged AP in the
	NWA’s managed AP list.

IP	This displays the IP address of the unmanaged AP.

MAC Address	This displays the MAC address of the unmanaged AP.

Model	This displays the model name and 802.11 mode of the
	unmanaged AP.

Description	This displays the description of the unmanaged AP.

Add	Select the unmanaged AP from the list and click this to include
	the unmanaged AP in the NWA’s managed AP list.

Automatic Refresh	Enter how often you want the NWA to update this screen.
Interval

Refresh	Click this to update this screen immediately.