Chapter 10 Wireless Security Screen
Table 44 Wireless > Security: WPA
LABEL | DESCRIPTION |
ReAuthentication | Specify how often wireless stations have to resend user names and |
Timer | passwords in order to stay connected. |
| Enter a time interval between 10 and 9999 seconds. The default time |
| interval is 1800 seconds (30 minutes). Alternatively, enter “0” to turn |
| reauthentication off. |
| Note: If wireless station authentication is done using a RADIUS |
| server, the reauthentication timer on the RADIUS server |
| has priority. |
|
|
Idle Timeout | The NWA automatically disconnects a wireless station from the wired |
| network after a period of inactivity. The wireless station needs to |
| enter the user name and password again before access to the wired |
| network is allowed. |
| The default time interval is 3600 seconds (or 1 hour). |
|
|
Group Key | The Group Key Update Timer is the rate at which the AP sends a |
Update Timer | new group key out to all clients. The |
| equivalent of automatically changing the group key for an AP and all |
| stations in a WLAN on a periodic basis. Setting of the Group Key |
| Update Timer is also supported in |
| is 1800 seconds (30 minutes). |
|
|
Apply | Click Apply to save your changes. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
10.4.5 Security: WPA2 or WPA2-MIX
Use this screen to set the selected profile to WPA2 or
Figure 98 Wireless > Security:WPA2 or
156 |
| |
| ||
|
|
|