Chapter 5 Controller AP Mode
5.4.1 The AP Lists Edit Screen
Use this screen to change the description or radio profile of an AP managed by the NWA. Click Edit in the CONTROLLER > AP Lists screen. The following screen displays.
Figure 25 The Controller > AP Configuration Screen
The following table describes the labels in this screen.
Figure 26 The Controller > AP Configuration Screen
LABEL | DESCRIPTION |
Model | This is the model number of the managed AP. |
|
|
MAC Address | This is the MAC address of the managed AP. |
|
|
Description | Enter a short description of this access point (up to 32 English |
| keyboard characters). |
|
|
Enable Breathing LED | This field displays only if the managed AP supports this feature. |
| Select this box to disable the WLAN LED (light). Clear this box to |
| enable the WLAN LED. |
|
|
WLAN1 Radio Profile | Select the radio profile you want to use for this AP. Configure |
| radio profiles in the Profile Edit > Radio screen. |
| Select Disable if you do not want to use a radio profile. The AP’s |
| radio is not active when you select Disable. |
|
|
WLAN2 Radio Profile | This field displays only if the managed AP has dual radios. |
| Select the second radio profile you want to use for this AP. |
| Configure radio profiles in the Profile Edit > Radio screen. |
| Select Disable if you do not want to use a second radio profile. |
| The AP’s radio is not active when you select Disable. |
|
|
Apply | Click this to save the changes in this screen. |
|
|
Reset | Click this to return the fields in this screen to their previously- |
| saved values. |
|
|
| 59 |
|
|