Chapter 6 Tutorial
5Save the friendly AP list somewhere it can be accessed by all the other access points on the network. In this example, save it on the network file server (E in Figure 47 on page 84). The default filename is “Flist”.
Figure 52 Tutorial: Save Friendly AP list
6.3.2 Activate Periodic Rogue AP Detection
Take the following steps to activate rogue AP detection on the first of your NWAs.
1In the ROGUE AP > Configuration screen, select Enable from the Rogue AP Period Detection field.
Figure 53 Tutorial: Periodic Rogue AP Detection
2In the Period field, enter how often you want the NWA to scan for rogue APs. You can have the NWA scan anywhere from once every ten minutes to once every hour. In this example, enter “10”.
3In the Expiration Time field, enter how long an AP’s entry can remain in the list before the NWA discards it from the list when the AP is no longer active. In this example, enter “30”.
88 |
| |
| ||
|
|
|