Chapter 5 Controller AP Mode
Table 14 The Profile Edit > Radio > Edit Screen
LABEL | DESCRIPTION |
Rates Configuration | This section controls the data rates permitted for clients of an AP |
| using this radio profile. |
| For each Rate, select an option from the Configuration list. The |
| options are: |
| Basic (1~11 Mbps only): Clients can always connect to the |
| access point at this speed. |
| Optional: Clients can connect to the access point at this speed, |
| when permitted to do so by the AP. |
| Disabled: Clients cannot connect to the access point at this |
| speed. |
|
|
Select SSID Profile | Use this section to choose the SSID profile or profiles you want |
| access points using this radio profile to use. Each AP can use |
| multiple SSID profiles simultaneously. |
| Configure SSID profiles in the Profile Edit > SSID screens. |
|
|
Index | This is the SSID profile’s index number. |
|
|
Active | Select this to use the SSID profile selected in the Profile field. |
|
|
Profile | Select the profile you want to use. Ensure that you also select the |
| Active box. |
|
|
Enable Antenna | Select this to have access points using this radio profile use |
Diversity | antenna diversity, where available. Antenna diversity uses |
| multiple antennas to reduce signal interference. |
|
|
Apply | Click this to save your changes. |
|
|
Reset | Click this to reload the previous configuration for this screen. |
|
|
66 |
| |
| ||
|
|
|