Appendix F Text File Based Auto Configuration
Use the following procedure to have the AP download the configuration file.
Table 115 Configuration via SNMP
STEPS | MIB VARIABLE | VALUE |
|
Step 1 | pwTftpServer | Set the IP address of the TFTP server. | |
|
|
| |
Step 2 | pwTftpFileName | Set the file name, for example, | |
|
| g3000hcfg.txt. | |
|
|
|
|
Step 3 | pwTftpFileType | Set to 3 | (text configuration file). |
|
|
|
|
Step 4 | pwTftpOpCommand | Set to 2 | (download). |
|
|
|
|
Verifying Your Configuration File Upload Via SNMP
You can use SNMP management software to display the configuration file version currently on the device by using the following MIB.
Table 116 Displaying the File Version
ITEM | OBJECT ID | DESCRIPTION |
pwCfgVersion | 1.3.6.1.4.1.890.1.9. | This displays the current configuration file |
| 1.2 | version. |
|
|
|
Troubleshooting Via SNMP
If you have any difficulties with the configuration file upload, you can try using the following MIB 10 to 20 seconds after using SNMP to have the AP download the configuration file.
Table 117 Displaying the File Version
ITEM | OBJECT ID | DESCRIPTION |
pwTftpOpStatu | 1.3.6.1.4.1.890.1.9. | This displays the current operating status of the |
s | 1.6 | TFTP client. |
|
|
|
Configuration File Format
The text based configuration file must use the following format.
Figure 290 Configuration File Format
!#ZYXEL PROWLAN !#VERSION 12
wcfg security 1 xxx wcfg security save wcfg ssid 1 xxx wcfg ssid save
The first line must be !#ZYXEL PROWLAN.
| 381 |
|
|