Chapter 16 Remote Management Screens
16.7 The SNMP Screen
Use this screen to have a manager station administrate your NWA over the network. To change your NWA’s SNMP settings, click REMOTE MGMT > SNMP. The following screen displays.
Figure 123 Remote MGNT > SNMP
The following table describes the labels in this screen.
Table 60 Remote MGNT > SNMP
LABEL | DESCRIPTION |
SNMP Configuration | |
|
|
Get Community | Enter the Get Community, which is the password for the incoming |
| Get and GetNext requests from the management station. The default |
| is public and allows all requests. |
|
|
Set Community | Enter the Set community, which is the password for incoming Set |
| requests from the management station. The default is public and |
| allows all requests. |
|
|
Community | Type the trap community, which is the password sent with each trap |
| to the SNMP manager. The default is public and allows all requests. |
|
|
Trap Destination | Type the IP address of the station to send your SNMP traps to. |
|
|
SNMP Version | Select the SNMP version for the NWA. The SNMP version on the NWA |
| must match the version on the SNMP manager. Choose SNMP version |
| 1 (SNMPv1), SNMP version 2 (SNMPv2) or SNMP version 3 |
| (SNMPv3). |
|
|
Trap Community | Type the trap community, which is the password sent with each trap |
| to the SNMP manager. The default is “public” and allows all requests. |
| This field is available only when SNMPv1 or SNMPv2 is selected in |
| the SNMP Version field. |
|
|
194 |
| |
| ||
|
|
|