Chapter 8 Basic Setting

The following table describes the labels in this screen.

Table 13 Basic Setting > IP Setup

LABEL

DESCRIPTION

Default

Type the IP address of the default outgoing gateway in dotted decimal

Gateway

notation, for example 192.168.1.254.

 

 

Domain

DNS (Domain Name System) is for mapping a domain name to its

Name Server

corresponding IP address and vice versa. Enter a domain name server IP

 

address in order to be able to use a domain name instead of an IP address.

 

 

Default

Specify which traffic flow (In-Bandor Out-of-band) the Switch is to send

Management

packets originating from itself (such as SNMP traps) or packets with

 

unknown source.

 

Select Out-of-bandto have the Switch send the packets to the

 

management port labelled MGMT. This means that device(s) connected to

 

the other port(s) do not receive these packets.

 

Select In-Bandto have the Switch send the packets to all ports except the

 

management port (labelled MGMT) to which connected device(s) do not

 

receive these packets.

 

 

Management IP Address

Use these fields to set the settings for the out-of-band management port.

 

 

IP

Enter the out-of-band management IP address of your Switch in dotted

Address

decimal notation. For example, 192.168.0.1.

 

 

IP Subnet

Enter the IP subnet mask of your Switch in dotted decimal notation, for

Mask

example, 255.255.255.0.

 

 

Default

Enter the IP address of the default outgoing gateway in dotted decimal

Gateway

notation, for example, 192.168.0.254

 

 

Apply

Click Apply to save your changes to the Switch’s run-time memory. The

 

Switch loses these changes if it is turned off or loses power, so use the

 

Save link on the top navigation panel to save your changes to the non-

 

volatile memory when you are done configuring.

 

 

Cancel

Click Cancel to reset the fields to your previous configuration.

 

 

IP Interface

 

Use these fields to create or edit IP routing domains on the Switch.

 

 

IP

Enter the IP address of your Switch in dotted decimal notation, for

Address

example, 192.168.1.1. This is the IP address of the Switch in an IP routing

 

domain.

 

 

IP Subnet

Enter the IP subnet mask of an IP routing domain in dotted decimal

Mask

notation, for example, 255.255.255.0.

 

 

VID

Enter the VLAN identification number to which an IP routing domain

 

belongs.

 

 

Add

Click Add to save your changes to the Switch’s run-time memory. The

 

Switch loses these changes if it is turned off or loses power, so use the

 

Save link on the top navigation panel to save your changes to the non-

 

volatile memory when you are done configuring.

 

 

Cancel

Click Cancel to reset the fields to your previous configuration.

 

 

Index

This field displays the index number of an entry.

 

 

IP Address

This field displays IP address of the Switch in the IP domain.

 

 

114

 

XGS4700-48F User’s Guide