Chapter 24 Multicast
24.7 General MVR Configuration
Use the MVR screen to create multicast VLANs and select the receiver port(s) and a source port for each multicast VLAN. Click Advanced Applications > Multicast > Multicast Setting > MVR link to display the screen as shown next.
Note: You can create up to five multicast VLANs and up to 256 multicast rules on the Switch.
Note: Your Switch automatically creates a static VLAN (with the same VID) when you create a multicast VLAN in this screen.
Figure 109 Advanced Application > Multicast > Multicast Setting > MVR
The following table describes the related labels in this screen.
Table 66 Advanced Application > Multicast > Multicast Setting > MVR
LABEL | DESCRIPTION |
Active | Select this check box to enable MVR to allow one single multicast VLAN |
| to be shared among different subscriber VLANs on the network. |
|
|
Name | Enter a descriptive name (up to 32 printable ASCII characters) for |
| identification purposes. |
|
|
Multicast VLAN | Enter the VLAN ID (1 to 4094) of the multicast VLAN. |
ID |
|
|
|
| 239 |
|
|