Chapter 44 Maintenance
ZyNOS (ZyXEL Network Operating System, sometimes referred to as the “ras” file) is the system firmware and has a “bin” filename extension.
Table 141 Filename Conventions
FILE TYPE | INTERNA | EXTERNA | DESCRIPTION |
| L NAME | L NAME |
|
Configuration | config | .cfg | This is the configuration (config) filename on |
File |
|
| the Switch. Uploading the config file replaces |
|
|
| the specified configuration file system, |
|
|
| including your Switch configurations, system- |
|
|
| related data (including the default password), |
|
|
| the error log and the trace log. |
|
|
|
|
Firmware | *.bin | This is the generic name for the ZyNOS | |
|
| firmware on the Switch. | |
|
| ||
|
|
|
You can store up to two images, or firmware files of the same device model, on the Switch. Only one image is used at a time.
•Run the boot image <12> command to specify which image is updated when firmware is loaded using the web configurator and to specify which image is loaded when the Switch starts up.
•You can also use FTP commands to upload firmware to any image.
The Switch supports dual firmware images,
ftp> put firmware.bin
This is a sample FTP session showing the transfer of the computer file "firmware.bin" to the Switch.
ftp> get config config.cfg
This is a sample FTP session saving the current configuration to a file called “config.cfg” on your computer.
If your (T)FTP client does not allow you to have a destination filename different than the source, you will need to rename them as the Switch only recognizes “config”,
Be sure to upload the correct model firmware as uploading the wrong model firmware may damage your device.
392 |
| |
| ||
|
|
|