Chapter 13 Spanning Tree Protocol
13.6Configure Multiple Rapid Spanning Tree Protocol
To configure MRSTP, click MRSTP in the Advanced Application > Spanning Tree Protocol screen. See Section 13.1 on page 149 for more information on
MRSTP.
Figure 70 Advanced Application > Spanning Tree Protocol > MRSTP
The following table describes the labels in this screen.
Table 31 Advanced Application > Spanning Tree Protocol > MRSTP
LABEL | DESCRIPTION |
Status | Click Status to display the MRSTP Status screen (see Figure 69 on |
| page 159). |
|
|
Tree | This is a read only index number of the STP trees. |
|
|
Active | Select this check box to activate an STP tree. Clear this checkbox to |
| disable an STP tree. |
| Note: You must also activate Multiple Rapid Spanning Tree in the |
| Advanced Application > Spanning Tree Protocol > |
| Configuration screen to enable MRSTP on the Switch. |
160 |
| |
| ||
|
|
|