Chapter 10 Static MAC Forward Setup
Click Advanced Applications > Static MAC Forwarding in the navigation panel to display the configuration screen as shown.
Figure 55 Advanced Application > Static MAC Forwarding
The following table describes the labels in this screen.
Table 23 Advanced Application > Static MAC Forwarding
LABEL | DESCRIPTION |
Active | Select this check box to activate your rule. You may temporarily deactivate |
| a rule without deleting it by clearing this check box. |
|
|
Name | Enter a descriptive name for identification purposes for this static MAC |
| address forwarding rule. |
|
|
MAC Address | Enter the MAC address in valid MAC address format, that is, six |
| hexadecimal character pairs. |
| Note: Static MAC addresses do not age out. |
|
|
VID | Enter the VLAN identification number. |
|
|
Port | Enter the port where the MAC address entered in the previous field will be |
| automatically forwarded. |
|
|
Add | Click Add to save your rule to the Switch’s |
| loses this rule if it is turned off or loses power, so use the Save link on the |
| top navigation panel to save your changes to the |
| when you are done configuring. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
Clear | Click Clear to reset the fields to the factory defaults. |
|
|
Index | Click an index number to modify a static MAC address rule for a port. |
|
|
Active | This field displays whether this static MAC address forwarding rule is active |
| (Yes) or not (No). You may temporarily deactivate a rule without deleting |
| it. |
|
|
Name | This field displays the descriptive name for identification purposes for this |
| static MAC |
|
|
MAC Address | This field displays the MAC address that will be forwarded and the VLAN |
| identification number to which the MAC address belongs. |
|
|
VID | This field displays the ID number of the VLAN group. |
140 |
| |
| ||
|
|
|