Chapter 31 PPPoE
Click the VLAN link in the Intermediate Agent > Port screen to display the screen as shown.
Figure 151 Advanced Application > PPPoE > Intermediate Agent > Port > VLAN
The following table describes the labels in this screen.
Table 102 Advanced Application > PPPoE > Intermediate Agent > Port > VLAN
LABEL | DESCRIPTION |
Show Port | Enter a port number to show the PPPoE Intermediate Agent settings for |
| the specified VLAN(s) on the port. |
|
|
Show VLAN | Use this section to specify the VLANs you want to configure in the section |
| below. |
|
|
Start VID | Enter the lowest VLAN ID you want to configure in the section below. |
|
|
End VID | Enter the highest VLAN ID you want to configure in the section below. |
|
|
Apply | Click Apply to display the specified range of VLANs in the section below. |
|
|
Port | This field displays the port number specified above. |
|
|
VID | This field displays the VLAN ID of each VLAN in the range specified above. |
| If you configure the * VLAN, the settings are applied to all VLANs. |
|
|
* | Use this row to make the setting the same for all VLANs. Use this row first |
| and then make adjustments on a |
| Note: Changes in this row are copied to all the VLANs as soon as |
| you make them. |
|
|
Enter a string of up to 63 ASCII characters that the Switch adds into the | |
| Agent Circuit ID |
| are allowed. |
| The Circuit ID you configure here has the highest priority. |
308 |
| |
| ||
|
|
|