Chapter 44 Maintenance

44.8.2 FTP Command Line Procedure

1Launch the FTP client on your computer.

2Enter open, followed by a space and the IP address of your Switch.

3Press [ENTER] when prompted for a username (the default is “admin”).

4Enter your password as requested (the default is “1234”).

5Enter bin to set transfer mode to binary.

6Use put to transfer files from the computer to the Switch, for example, put firmware.bin ras-0transfers the firmware on your computer (firmware.bin) to the Switch and renames it to “ras-0”. Similarly, put config.cfg config transfers the configuration file on your computer (config.cfg) to the Switch and renames it to “config”. Likewise get config config.cfg transfers the configuration file on the Switch to your computer and renames it to “config.cfg”. See Table 141 on page 392 for more information on filename conventions.

7Enter quit to exit the ftp prompt.

44.8.3 GUI-based FTP Clients

The following table describes some of the commands that you may see in GUI- based FTP clients.

Table 142 General Commands for GUI-based FTP Clients

COMMAND

DESCRIPTION

Host Address

Enter the address of the host server.

 

 

Login Type

Anonymous.

 

This is when a user I.D. and password is automatically supplied to

 

the server for anonymous access. Anonymous logins will work only

 

if your ISP or service administrator has enabled this option.

 

Normal.

 

The server requires a unique User ID and Password to login.

 

 

Transfer Type

Transfer files in either ASCII (plain text format) or in binary mode.

 

Configuration and firmware files should be transferred in binary

 

mode.

 

 

Initial Remote

Specify the default remote directory (path).

Directory

 

 

 

Initial Local

Specify the default local directory (path).

Directory

 

 

 

 

393

XGS4700-48F User’s Guide