Chapter 40 DHCP
Table 133 IP Application > DHCP > VLAN (continued)
LABEL | DESCRIPTION | |
Server | Use this section if you want to configure the Switch to function as a DHCP | |
| server for this VLAN. | |
|
| |
Client IP | Specify the first of the contiguous addresses in the IP address pool. | |
Pool |
| |
Starting |
| |
Address |
| |
|
| |
Size of | Specify the size, or count of the IP address pool. The Switch can issue | |
Client IP | from 1 to 253 IP addresses to DHCP clients. | |
Pool |
| |
|
| |
IP Subnet | Enter the subnet mask for the client IP pool. | |
Mask |
| |
|
| |
Default | Enter the IP address of the default gateway device. | |
Gateway |
| |
|
| |
Primary/ | Enter the IP addresses of the DNS servers. The DNS servers are passed to | |
Secondar | the DHCP clients along with the IP address and the subnet mask. | |
y DNS |
| |
Server |
| |
|
| |
Relay | Use this section if you want to configure the Switch to function as a DHCP | |
| relay for this VLAN. | |
|
| |
Remote | Enter the IP address of a DHCP server in dotted decimal notation. | |
DHCP |
| |
Server 1 |
| |
.. 3 |
| |
|
| |
Relay | Select the Option 82 check box to have the Switch add information (slot | |
Agent | number, port number and VLAN ID) to client DHCP requests that it relays | |
Informati | to a DHCP server. | |
on | ||
| ||
|
| |
Informati | This | |
on | General Setup screen. | |
| Select the check box for the Switch to add the system name to the client | |
| DHCP requests that it relays to a DHCP server. | |
|
| |
Add | Click Add to save your changes to the Switch’s | |
| Switch loses these changes if it is turned off or loses power, so use the | |
| Save link on the top navigation panel to save your changes to the non- | |
| volatile memory when you are done configuring. | |
|
| |
Cancel | Click Cancel to begin configuring this screen afresh. | |
|
| |
Clear | Click Clear to reset the fields to the factory defaults. | |
|
| |
VID | This field displays the ID number of the VLAN group to which this DHCP | |
| settings apply. | |
|
| |
Type | This field displays Server or Relay for the DHCP mode. | |
|
| |
DHCP Status | For DHCP server configuration, this field displays the starting IP address | |
| and the size of the IP address pool. | |
| For DHCP relay configuration, this field displays the first remote DHCP | |
| server IP address. | |
|
| |
Delete | Select the configuration entries you want to remove and click Delete to | |
| remove them. | |
|
| |
Cancel | Click Cancel to clear the Delete check boxes. | |
|
|
366 |
| |
| ||
|
|
|