Chapter 3 Hardware Overview
Factor Pluggable (SFP) Transceiver MultiSource Agreement (MSA). See the SFF committee’s
You can change transceivers while the Switch is operating. You can use different transceivers to connect to Ethernet switches with different types of
•Type: SFP connection interface
•Connection speed: 1 Gigabit per second (Gbps)
To avoid possible eye injury, do not look into an operating fiber- optic module’s connectors.
3.1.1.1 Transceiver InstallationUse the following steps to install a mini GBIC transceiver (SFP or XFP module).
1Insert the transceiver into the slot with the exposed section of PCB board facing down.
Figure 10 Transceiver Installation Example
2Press the transceiver firmly until it clicks into place.
3The Switch automatically detects the installed transceiver. Check the LEDs to verify that it is functioning properly.
Figure 11 Installed Transceiver
3.1.1.2 Transceiver RemovalUse the following steps to remove a mini GBIC transceiver (SFP module).
42 |
| |
| ||
|
|
|