ZyXEL Communications XGS4700-48F 6.4How to Use Error Disable and Recovery on the Switch

Chapter 6 Tutorials

4Enter 1 for both Start VID and End VID. Click Apply.

5Then select Yes to enable PPPoE IA in VLAN 1 and also select Circuit-idand Remote-idto allow the Switch to add these two strings to frames tagged with VLAN 1 and pass to the PPPoE server. Click Apply.

The settings are completed now. If you miss some settings above, subscriber C could not successfully receive an IP address assigned by the PPPoE Server. If this happens, make sure you follow the steps exactly in this tutorial.

6.4How to Use Error Disable and Recovery on the Switch

This tutorial shows you how to shut down a port when:

•there is a loop occurred

or

•too many ARP requests (over 100 packets per second) received on a port

	85
XGS4700-48F User’s Guide