|
| Chapter 24 Multicast |
|
|
|
| Table 63 Advanced Application > Multicast > Multicast Setting (continued) | |
| LABEL | DESCRIPTION |
| Fast Leave | Enter an IGMP fast leave timeout value (from 200 to 6,348,800) in |
|
| miliseconds. Select this option to have the Switch use this timeout to |
|
| update the forwarding table for the port. |
|
| In fast leave mode, right after receiving an IGMP leave message from a |
|
| host on a port, the Switch itself sends out an IGMP |
|
| Query (GSQ) message to determine whether other hosts connected to |
|
| the port should remain in the specific multicast group. This helps speed |
|
| up the leave process. |
|
| This defines how many seconds the Switch waits for an IGMP report |
|
| before removing an IGMP snooping membership entry when an IGMP |
|
| leave message is received on this port from a host. |
|
|
|
| Group Limited | Select this option to limit the number of multicast groups this port is |
|
| allowed to join. |
|
|
|
| Max Group | Enter the number of multicast groups this port is allowed to join. Once a |
| Num. | port is registered in the specified number of multicast groups, any new |
|
| IGMP join report frame(s) is dropped on this port. |
|
|
|
| Throttling | IGMP throttling controls how the Switch deals with the IGMP reports |
|
| when the maximum number of the IGMP groups a port can join is |
|
| reached. |
|
| Select Deny to drop any new IGMP join report received on this port |
|
| until an existing multicast forwarding table entry is aged out. |
|
| Select Replace to replace an existing entry in the multicast forwarding |
|
| table with the new IGMP report(s) received on this port. |
|
|
|
| IGMP Filtering | Select the name of the IGMP filtering profile to use for this port. |
| Profile | Otherwise, select Default to prohibit the port from joining any |
|
| multicast group. |
|
| You can create IGMP filtering profiles in the Multicast > Multicast |
|
| Setting > IGMP Filtering Profile screen. |
|
|
|
| IGMP Querier | The Switch treats an IGMP query port as being connected to an IGMP |
| Mode | multicast router (or server). The Switch forwards IGMP join or leave |
|
| packets to an IGMP query port. |
|
| Select Auto to have the Switch use the port as an IGMP query port if |
|
| the port receives IGMP query packets. |
|
| Select Fixed to have the Switch always use the port as an IGMP query |
|
| port. Select this when you connect an IGMP multicast server to the |
|
| port. |
|
| Select Edge to stop the Switch from using the port as an IGMP query |
|
| port. The Switch will not keep any record of an IGMP router being |
|
| connected to this port. The Switch does not forward IGMP join or leave |
|
| packets to this port. |
|
|
|
| Apply | Click Apply to save your changes to the Switch’s |
|
| Switch loses these changes if it is turned off or loses power, so use the |
|
| Save link on the top navigation panel to save your changes to the non- |
|
| volatile memory when you are done configuring. |
|
|
|
| Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
|
| 233 |
|
|