Chapter 12 Filtering
Table 25 | Advanced Application > FIltering (continued) | |
LABEL |
| DESCRIPTION |
Action |
| Select Discard source to drop frames from the source MAC address |
|
| (specified in the MAC field). The Switch can still send frames to the MAC |
|
| address. |
|
| Select Discard destination to drop frames to the destination MAC address |
|
| (specified in the MAC address). The Switch can still receive frames |
|
| originating from the MAC address. |
|
| Select Discard source and Discard destination to block traffic to/from |
|
| the MAC address specified in the MAC field. |
|
|
|
MAC |
| Type a MAC address in a valid MAC address format, that is, six hexadecimal |
|
| character pairs. |
|
|
|
VID |
| Type the VLAN group identification number. |
|
|
|
Add |
| Click Add to save your changes to the Switch’s |
|
| Switch loses these changes if it is turned off or loses power, so use the Save |
|
| link on the top navigation panel to save your changes to the |
|
| memory when you are done configuring. |
|
|
|
Cancel |
| Click Cancel to begin configuring this screen afresh. |
|
|
|
Clear |
| Click Clear to reset the fields to the factory defaults. |
|
|
|
Index |
| This field displays the index number of the rule. Click an index number to |
|
| change the settings. |
|
|
|
Active |
| This field displays Yes when the rule is activated and No when is it |
|
| deactivated. |
|
|
|
Name |
| This field displays the descriptive name for this rule. This is for identification |
|
| purposes only. |
|
|
|
MAC |
| This field displays the source/destination MAC address with the VLAN |
Address |
| identification number to which the MAC address belongs. |
|
|
|
VID |
| This field displays the VLAN group identification number. |
|
|
|
Delete |
| Check the rule(s) that you want to remove in the Delete column and then |
|
| click the Delete button. |
|
|
|
Cancel |
| Click Cancel to clear the selected checkbox(es) in the Delete column. |
|
|
|
148 |
| |
| ||
|
|
|