Chapter 35 RIP

Table 111

IP Application > RIP (continued)

LABEL

DESCRIPTION

Network

This field displays the IP interface configured on the Switch.

 

Refer to the section on IP Setup for more information on configuring IP

 

domains.

 

 

Direction

Select the RIP direction from the drop-down list box. Choices are Outgoing,

 

Incoming, Both and None.

 

 

Version

Select the RIP version from the drop-down list box. Choices are RIP-1, RIP-

 

2B and RIP-2M.

 

 

Apply

Click Apply to save your changes to the Switch’s run-time memory. The

 

Switch loses these changes if it is turned off or loses power, so use the Save

 

link on the top navigation panel to save your changes to the non-volatile

 

memory when you are done configuring.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

 

327

XGS4700-48F User’s Guide