Chapter 24 Multicast
Click Advanced Applications > Multicast > Multicast Setting > IGMP Filtering Profile link to display the screen as shown.
Figure 106 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile
The following table describes the labels in this screen.
Table 65 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile
LABEL | DESCRIPTION |
Profile Name | Enter a descriptive name for the profile for identification purposes. |
| To configure additional rule(s) for a profile that you have already added, |
| enter the profile name and specify a different IP multicast address |
| range. |
|
|
Start Address | Type the starting multicast IP address for a range of multicast IP |
| addresses that you want to belong to the IGMP filter profile. |
|
|
End Address | Type the ending multicast IP address for a range of IP addresses that |
| you want to belong to the IGMP filter profile. |
| If you want to add a single multicast IP address, enter it in both the |
| Start Address and End Address fields. |
|
|
Add | Click Add to save the profile to the Switch’s |
| Switch loses these changes if it is turned off or loses power, so use the |
| Save link on the top navigation panel to save your changes to the non- |
| volatile memory when you are done configuring. |
|
|
Clear | Click Clear to reset the fields to the factory defaults. |
|
|
Profile Name | This field displays the descriptive name of the profile. |
|
|
Start Address | This field displays the start of the multicast address range. |
|
|
End Address | This field displays the end of the multicast address range. |
|
|
236 |
| |
| ||
|
|
|