Oki 5050 manual Setting the Language, User Language

6Press the Start key to save your entry.

7Enter your Sender ID. This is a descriptive title up to 32 characters long. Refer to the instructions below.

To Do This	Use
Enter numbers	Numeric keypad (press once)
Enter spaces	14/Space One Touch key
Enter hyphens	Hyphen key
Enter alphabet characters	Locate the character you want on the
	numeric keypad. Press that key repeatedly
	until the character appears on the display
Enter a unique character	Press the 0/Unique key repeatedly until
	the character you want appears on the
	display. The following characters are
	available: ! # & ‘ ( ) * + , - . / : ; = ? · ä ß
ñ ö ü Æ Å Ø æ å ø
Enter two successive	Press the No ▶ key to move to the
letters/numbers using	next character
the same key
Move the cursor to	Yes ◀ and No ▶ keys
make corrections

8Press the Start key to save your entry. The display shows NO=<CALL BACK NO.>.

9After the display clears, use the numeric keypad to enter the telephone number for call back messages. Enter up to 20 characters.

Tip: Use the 14/Space One Touch key to enter spaces.

1 0 Press the Start key to save your entry.

22Installation

1 1 Press the Select Function key to finish.

Setting the Language

Your OKIFAX 5050 comes with two languages in- stalled—English and Spanish, French or Portuguese, de- pending on where you bought your unit—which appear on the display and in reports. Follow the instructions be- low to switch languages.

1Press the Select Function key.

2Press the 9/User Program One Touch key. The display shows 1:FUNC. PROGRAMMING.

3Press the Yes ◀ key. The display shows FUNCTION NO. [ ]

ENTER 01-23.

4Using the numeric keypad, enter 15. The display shows

USER LANGUAGE.

5Press the No ▶ key to switch to the other installed language.

6To accept the language change, press the Yes ◀ key.

7Press the Select Function key to finish.

Of5050hw.pm6 22 4/15/98, 9:31 AM